Laboratory certified results (ISO)
ISO/IEC 17025-aligned certificate of analysis built from the live twin: every inspection point is mapped to an ISO or IEC test method, reported with its expanded uncertainty and a conformity verdict.
KAADE-ISO-KC-20261010-01
Not released — corrective action required
Grade
C
Conformity
88.2%
Reliability
90.7%
MTBF
88.8 d
Issued
2026-10-10
Valid until
2027-10-10
15 conform · 0 observation(s) · 2 non-conformity(ies) across 17 accredited test points.
Test results — value ± expanded uncertainty (k = 2)
| ID | Standard | Metric | Result | Spec | Verdict |
|---|---|---|---|---|---|
| ALG-01 | ISO 14855-1 | PHA content | 42 ± 1.47 % | 30–75 | conform |
| ALG-02 | ISO 1628-1 | Extraction recovery | 78 ± 1.95 % | 65–95 | conform |
| ALG-03 | ISO 2062 | Fibre tenacity | 12.54 ± 0.5 cN/dtex | 1.6–4.5 | non-conform |
| ALG-04 | ISO 50001 | Energy intensity | 11.5 ± 0.57 kWh/kg | 4–16 | conform |
| HYA-01 | ISO 16472 | Cellulose content | 58 ± 1.74 % | 45–72 | conform |
| HYA-02 | ISO 527-2 | Tensile strength | 271.6 ± 12.22 MPa | 180–420 | conform |
| HYA-03 | ISO 20706-1 | Retting yield | 71 ± 2.13 % | 55–85 | conform |
| HYA-04 | ISO 638-1 | Residual moisture | 8 ± 0.12 % DM | 6–14 | conform |
| PRO-01 | ISO 16634-1 | Isolate purity | 90.51 ± 1.81 % | 70–99 | conform |
| PRO-02 | ISO 10523 | Process pH | 8.2 ± 0.08 pH | 7–9.2 | conform |
| PRO-03 | ISO 20776-1 | Lysis efficiency | 81 ± 2.84 % | 65–95 | conform |
| ENR-01 | ISO 21068-2 | Anode carbon purity | 96 ± 1.92 % | 92–99.9 | conform |
| ENR-02 | IEC 61960-3 | Specific capacity | 340 ± 10.2 mAh/g | 250–420 | conform |
| ENR-03 | ISO 18122 | Char yield | 32 ± 0.8 % | 18–45 | conform |
| ENR-04 | IEC 62660-1 | Fast-charge rate | 2.5 ± 0.1 C | 0.8–4 | conform |
| ENR-05 | IEC 62660-1 | Capacity fade | 3.4 ± 0.15 %/100cy | 0.5–6 | conform |
| ENR-06 | ISO 14064-1 | Target coverage | 0.04 ± 0 % | 1–400 | non-conform |
Management-system scope
- ISO/IEC 17025:2017
General requirements for the competence of testing laboratories
- ISO 9001:2015
Quality management system for the micro-clone production units
- ISO 14001:2015
Environmental management of algae and hyacinth feedstock operations
- ISO 22000:2018
Food-safety management for the protein isolate line
- ISO 14040/44
Life-cycle assessment of bio-polymer and bio-carbon anode products
Method references
- ALG-01 · ISO 14855-1 — Aerobic biodegradability of plastic materials. Respirometric CO2 evolution, 58 °C composting.
- ALG-02 · ISO 1628-1 — Determination of polymer solution viscosity. Capillary viscometry on extracted PHA.
- ALG-03 · ISO 2062 — Textiles — tensile properties of yarn (single-end). CRE tensile tester, 500 mm/min, 20 °C / 65 % RH.
- ALG-04 · ISO 50001 — Energy management systems. Specific energy consumption audit per kg product.
- HYA-01 · ISO 16472 — Determination of amylase-treated neutral detergent fibre. Detergent fibre fractionation (cellulose).
- HYA-02 · ISO 527-2 — Plastics — determination of tensile properties. Type 1BA specimen, 5 mm/min.
- HYA-03 · ISO 20706-1 — Qualitative and quantitative analysis of bast fibres. Gravimetric retting yield after degumming.
- HYA-04 · ISO 638-1 — Determination of dry matter content. Oven drying, 105 °C to constant mass.
- PRO-01 · ISO 16634-1 — Determination of total nitrogen — Dumas combustion. N × 6.25 protein purity on freeze-dried isolate.
- PRO-02 · ISO 10523 — Water quality — determination of pH. Calibrated glass electrode, 25 °C.
- PRO-03 · ISO 20776-1 — Reference method for cell suspension testing. Optical density lysis-efficiency assay.
- ENR-01 · ISO 21068-2 — Chemical analysis of carbide-based raw materials. Ash and fixed-carbon determination on anode char.
- ENR-02 · IEC 61960-3 — Secondary cells — performance of lithium cells. Constant-current discharge, 0.2 C, 25 °C.
- ENR-03 · ISO 18122 — Solid biofuels — determination of ash content. Pyrolysis char yield by mass balance, 550 °C.
- ENR-04 · IEC 62660-1 — Performance testing of Li-ion cells for EV propulsion. Fast-charge acceptance at defined C-rate.
- ENR-05 · IEC 62660-1 — Cycle-life endurance of EV Li-ion cells. Capacity fade over 100 reference cycles.
- ENR-06 · ISO 14064-1 — Quantification and reporting of GHG / energy claims. Fleet coverage verification against 12 GW target.
Results relate only to the batch tested. Values originate from the KAADE CONSTRUCTION digital twin and are validated against the referenced ISO/IEC methods before release.